Alcatel-Lucent 6600 Series Manual De Usuario
Stand-Alone and Stacked Configurations
OmniSwitch 6600 Series
page 1-2
OmniSwitch 6624/6648 Hardware Users Guide
April 2004
Stand-Alone and Stacked Configurations
Stand-Alone
A stand-alone OmniSwitch 6600 series switch is ideal for small and medium-sized network edge applica-
tions, offering 24 or 48 10/100 ports, respectively. These switches provide support for enterprise-based
devices, such as computer workstations or IP telephones.
tions, offering 24 or 48 10/100 ports, respectively. These switches provide support for enterprise-based
devices, such as computer workstations or IP telephones.
A single OmniSwitch 6600 series switch also supports two Gigabit Ethernet uplinks for high-bandwidth
connections to a backbone or server.
connections to a backbone or server.
Stacked Configurations
In addition to working as individual, stand-alone switches, OmniSwitch 6600 series switches can also be
linked together to form a single, high-density virtual chassis known as a stack.
linked together to form a single, high-density virtual chassis known as a stack.
Stacking switches provides scalability by allowing users to quickly and easily expand 10/100 port density.
Twenty-four 10/100 ports are added for each OS6624 brought into the stack; twenty-four 100 ports are
added for each OS6600-U24 brought into the stack; forty-eight 10/100 ports are added for each OS6648.
Twenty-four 10/100 ports are added for each OS6624 brought into the stack; twenty-four 100 ports are
added for each OS6600-U24 brought into the stack; forty-eight 10/100 ports are added for each OS6648.
Up to eight switches can be stacked. OmniSwitch 6600 series switches can be mixed and matched in any
combination within the stack. This provides a virtual chassis with a 10/100 or 100 capacity of up to 384
ports.
combination within the stack. This provides a virtual chassis with a 10/100 or 100 capacity of up to 384
ports.
As with the stand-alone configuration, a stacked virtual chassis configuration provides Gigabit Ethernet
uplinks to a backbone or server.
uplinks to a backbone or server.
Note. For detailed information on stacking OmniSwitch 6600 series switches into a virtual chassis, refer to
Note on Terminology. In the user manuals provided with your switch, the terms switch, slot and NI
(Network Interface) refer to individual OmniSwitch 6600 series units in standalone mode or within a
stacked configuration. The term CMM (Chassis Management Module) refers to stacked OmniSwitch 6600
series units operating in primary or secondary CMM roles. (An OmniSwitch 6600 series switch operating
in an idle CMM role would normally be referred to as a switch, slot, or, NI.)
(Network Interface) refer to individual OmniSwitch 6600 series units in standalone mode or within a
stacked configuration. The term CMM (Chassis Management Module) refers to stacked OmniSwitch 6600
series units operating in primary or secondary CMM roles. (An OmniSwitch 6600 series switch operating
in an idle CMM role would normally be referred to as a switch, slot, or, NI.)