Alcatel-Lucent 6850-P48L Manual De Usuario
14
Your First Login Session
June 2007
Once the switch or stack has successfully booted and you have
accessed your computer’s terminal emulation software via the
console port, you are ready to log in to the switch’s Command
Line Interface (CLI) and configure basic information.
Complete the following steps during your first login session:
accessed your computer’s terminal emulation software via the
console port, you are ready to log in to the switch’s Command
Line Interface (CLI) and configure basic information.
Complete the following steps during your first login session:
•
Log in to the switch or stack
•
Unlock session types
•
Change the login password
•
Set the date and time
•
Set optional system information
•
Save your changes
Note. You must be connected to the switch via the console
port before initiating your first login session. If you are
using OmniSwitch 6850 Series switches in a stacked
configuration, you must be connected to the console port
of the stack’s primary switch.
Logging in to the Switch
When you first log in to the switch or stack, you will be
prompted for a login (i.e., user) name and password. During
this first login session, only one user name option and one
password option is available:
prompted for a login (i.e., user) name and password. During
this first login session, only one user name option and one
password option is available:
•
Login (i.e., user name)—admin
•
Password—switch
To log in to the switch or stack, enter admin at the login
prompt:
prompt:
login: admin
Next, enter the factory default password, switch, at the pass-
word prompt:
word prompt:
password: switch
Your First Login Session