Agilent Technologies 34937A Manual De Usuario
4
Agilent 34937A-34939A General Purpose Switch Modules User’s Guide
34937A, 34938A and 34939A SCPI Programming Examples
34937A, 34938A and 34939A SCPI Programming Examples
The programming examples below provide you with SCPI command
examples to use for actions specific to the general purpose switch
modules.
examples to use for actions specific to the general purpose switch
modules.
The slot and channel addressing scheme used in these examples follow the
form sccc where s is the mainframe slot number (1 through 8) and ccc is
the channel number.
form sccc where s is the mainframe slot number (1 through 8) and ccc is
the channel number.
For complete information on the SCPI commands used to program the
34980A, and for example programs, refer to the Agilent 34980A
Programmer’s Reference contained on the 34980A Product Reference CD.
34980A, and for example programs, refer to the Agilent 34980A
Programmer’s Reference contained on the 34980A Product Reference CD.
Opening and Closing Channels
Example: Closing and opening channels
The first two commands close
channel 3 for a module in slot 2, then channel 5 for that module.
The last command opens both channel 3 and channel 5.
ROUTe:CLOSe (@2003)
ROUTe:CLOSe (@2005)
ROUTe:OPEN (@2003,2005)
Example: Querying channels for open or closed state
The following command
returns a 1 (true) or 0 (false) state of channel 016 for a module in slot 3.
ROUTe:CLOSe (@3016)
ROUTe:CLOSe? (@3016) !Returns a 1
ROUTe:OPEN? (@3016) !Returns a 0
Reading Jumper State and System Identity
Example: Querying the power-failure state of 5 A relays
The following command
returns the position of the power- fail jumper, either “MAIN” (all relays
maintain their present state when power fails) or “OPEN” (all relays open
when power fails) for a module in slot 4. If this command is sent to a
module other than the 34937A or 34938A, “NONE” is returned (no error is
generated). In particular, the position of the power- fail jumper on the
34939A module cannot be queried using this commmand.
maintain their present state when power fails) or “OPEN” (all relays open
when power fails) for a module in slot 4. If this command is sent to a
module other than the 34937A or 34938A, “NONE” is returned (no error is
generated). In particular, the position of the power- fail jumper on the
34939A module cannot be queried using this commmand.
SYSTem:MODule:PFAil:JUMPer:AMP5? 4
Example: Querying the system for module identify (all modules)
The following
command returns the identify of the module installed in slot 7.
SYSTem:CTYPe? 7