Adtran ADT-1234POE Manual De Usuario

NetVanta 1000/1000R Series Hardware Installation Guide

 Physical Descriptions

61200500L1-34N

Copyright © 2008 ADTRAN, Inc.

19

The NetVanta 1224STs contain 24 10/100BaseT Ethernet interfaces (RJ-45). These interfaces are 
consecutively numbered 1 through 24, from left to right, with the numbers screened directly above 
each port. Status LEDs for each of these interfaces are located directly over these numbers. 

The NetVanta 1224ST PoE also has green and red PoE status LEDs located in the upper left and upper 
right corners (respectively) of each Ethernet connector. 

The NetVanta 1224STs also contain two Gigabit Ethernet interfaces that provide two fixed RJ-45 
connectors and two standard SFP slots for fiber connectivity. (Use either the RJ-45 connectors or the 
SFP slots. The fiber slots have precedence.) These interfaces are labeled 

 and 

, and their status 

LEDs (also labeled 

 and 

) are located to the left of RJ-45 port 1, above the 

LED. 

The 

LED, which indicates the unit’s status, is located to the lower left of RJ-45 port 1. 

The NetVanta 1224ST and NetVanta 1224ST PoE rear panel is shown below. Refer to Appendix A on page 67 
for pinouts.