Intel ECB-862 Manual De Usuario

ECB-862/862L User’s Manual 67  

 

Load Fail-Safe Defaults (Y/N)? N 

If you want to process, type <Y> and press <Enter>. The default settings will be loaded. 

This feature loads optimized setting from the BIOS ROM. Use the default values as 
standard values for your system. Highlight this option in the main menu and press <Enter>. 
The message below will appear. 

Load Optimized Defaults (Y/N)? N 

Type <Y> and press <Enter> to load the Setup default values. 

You can assign, modify, or cancel password settings. To modify, highlight “Set Supervisor 
Password” or “Set User Password” and press the <Enter> key. The screen will prompt you 
(“Enter Password:”). Enter your password. The maximum size of the password is 8 
characters. System will prompt you to reenter the password to verify. Remember the 
passwords are case sensitive. 

If you want to remove the passwords, either delete passwords or press <Enter> when 
prompting for new password. 

If you want it to require password upon initial system startup and upon entering the CMOS 
Setup Utility, you will need to change the selection of the (Security Option) under 
(Advanced BIOS Features) to “System”. 

If the setting is “Setup”, the system will only require the password you activate CMOS 
Setup Utility. 

When all the changes have been made, highlight "Save & Exit Setup" and press <Enter>. 
The message below will appear: 

Save to CMOS and Exit (Y/N)? N 

Type "Y" and press <Enter>. The modifications you have made will be written into the 
CMOS memory, and the system will reboot. 

When you do not want to save the changes you have made, highlight "Exit Without 
Saving" and press <Enter>, the message below will appear: 

Quit Without Saving (Y/N)? N 

Type "Y" and press <Enter>. The system will reboot.