HP (Hewlett-Packard) DL160 Manual De Usuario
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for additional information.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for additional information.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Non-Hot Plug SATA Model
NOTE: Non-Hot Plug models are not upgradeable to Hot Plug. Non-Hot Plug
models require the addition of the HP HBA SAS-SATA 4x1LN Cable Kit (P/N:
452130-B21) in order to connect a hardware RAID controller.
models require the addition of the HP HBA SAS-SATA 4x1LN Cable Kit (P/N:
452130-B21) in order to connect a hardware RAID controller.
HP ProLiant DL160 G5 Non-Hot Plug SATA Rack CTO Chassis
445192-B21
Factory Integrated Model ships with:
Two embedded NC105i PCIe Gigabit Server Adapters (WOL & PXE-capable)
Two available PCI-Express 2 slots:
Slot 1: full-length/full-height
Slot 2: low-profile/half-height
Slot 2: low-profile/half-height
650 Watt Power Supply
One Highline IEC Power Cord
6 Non-Hot Plug Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Rails
Fixed Rails
Hot Plug Model
HP ProLiant DL160 G5 Hot Plug SAS/SATA Rack CTO Chassis
445193-B21
Factory Integrated Model ships with:
Two embedded NC105i PCIe Gigabit Server Adapters (WOL & PXE-capable)
Two available PCI-Express 2 slots:
Slot 1: full-length/full-height
Slot 2: low-profile/half-height
Slot 2: low-profile/half-height
650 Watt Power Supply
One Highline IEC Power Cord
6 Non-Hot Plug Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Rails
Fixed Rails
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
otherwise noted)
Processors
Quad-Core Processors
Quad-Core Intel® Xeon® processor X5482 (3.20 GHz, 120W, 1600MHz FSB),
FIO
FIO
NOTE: If 2 processors are desired, select one 495614-L21 and one 495614-
B21.
B21.
495614-L21
QuickSpecs
HP ProLiant DL160 Generation 5
Configuration Information - Factory Integrated Models
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009
Page 15