HP (Hewlett-Packard) DL160 Manual De Usuario

1-4

Four Non-hot plug SATA or four 3.5" Hot-plug
SAS/SATA hard drive bays

A

Optional DVD-ROM, or DVD/CD RW

 

DVD-ROM

Up to 1

A

Integrated IDE (ATAPI) (optional)

DVD/CD RW

Up to 1

A

Integrated IDE (ATAPI) (optional)

NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to
the HBA or Controller technical specifications for details.

 

250GB 1.5G SATA 7.2K
500GB 1.5G SATA 7.2K
750GB 1.5G SATA 7.2K

Up to 4

1-4

HP Embedded SATA RAID Controller

NOTE: Transfer rate: 1.5 Gb/s SATA

 

160GB 1.5G SATA 7.2K

Up to 4

1-4

HP Embedded SATA RAID Controller

NOTE: Transfer rate: 1.5 Gb/s SATA

NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for
Hot Plug models only.

 

160GB SATA 7.2K
250GB SATA 7.2K
500GB SATA 7.2K
750GB SATA 7.2K
1TB SATA 7.2K

Up to 4

1-4

HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1

NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G
SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA,
3 Gb/s SAS

HP Smart Array P400 Controller
HP Smart Array P800 Controller

 

160GB 1.5G SATA 7.2K

Up to 4

1-4

HP Embedded SATA RAID Controller

NOTE: Transfer rate: 1.5 Gb/s SATA

NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for
Hot Plug models only.

DA - 12902   Worldwide QuickSpecs — Version 19 — 1/26/2009

Page 31