Gateway E-9722R Manual De Usuario
CHAPTER 4: Installing Components
48
To install an optional mezzanine board:
1
Follow the instructions in
. Make sure
that you turn off the server, then unplug the power cord(s) and all other cables connected
to the server.
to the server.
2
Follow the instructions in
.
3
Remove the PCI riser assembly by following the instructions in
4
Align the holes on one side of the mezzanine board with the plastic standoffs and align
the other side with the mezzanine board slots (1).
the other side with the mezzanine board slots (1).
5
Push down on the card (2) to seat it in the mezzanine board slot and onto the plastic
standoffs until the retaining tabs snap into place.
standoffs until the retaining tabs snap into place.
6
Replace the PCI riser card assembly by following the instructions in
7
Follow the instructions in
To remove an optional mezzanine board:
1
Follow the instructions in
. Make sure
that you turn off the server, then unplug the power cord(s) and all other cables connected
to the server.
to the server.
2
Follow the instructions in
.
3
Remove the PCI riser assembly by following the instructions in
4
Push aside the plastic retaining tabs (1) and pull the mezzanine board (2) out of the
mezzanine board slot.
mezzanine board slot.
5
Replace the PCI riser card assembly by following the instructions in
6
Follow the instructions in