Gateway 6400 Manual De Usuario
Video problems
101
The color monitor displays everything in black and white.
The displayed characters are garbled.
The video is distorted.
Probable cause
Solution
The system was turned on
before the monitor
before the monitor
Make sure the monitor is turned on, then
restart the system.
restart the system.
The display type is set
incorrectly
incorrectly
In the Control Panel window (Start | Settings |
Control Panel), double-click Display, set the
display to the appropriate monitor type, then
restart the system.
Control Panel), double-click Display, set the
display to the appropriate monitor type, then
restart the system.
Probable cause
Solution
The video cable is damaged
Make sure the cable and connectors are in
good condition (no bent pins or broken wires).
good condition (no bent pins or broken wires).
The display setup is incorrect
In the Control Panel window (Start | Settings |
Control Panel), double-click Display and
check the settings. The correct video type
should be selected, along with a supported
resolution. Check your monitor and video
controller documentation for details.
Control Panel), double-click Display and
check the settings. The correct video type
should be selected, along with a supported
resolution. Check your monitor and video
controller documentation for details.
Probable cause
Solution
The monitor controls are not
properly adjusted
properly adjusted
Adjust the monitor controls until the text
becomes clear. (See your monitor
documentation for more information.)
becomes clear. (See your monitor
documentation for more information.)
The connector or cable is
damaged
damaged
Make sure the cable and connectors are in
good condition (no bent pins or broken wires).
good condition (no bent pins or broken wires).
The surge protector or UPS is
damaged
damaged
Disconnect the monitor power cable and
connect it directly to the power source.
connect it directly to the power source.
05032.book Page 101 Monday, July 10, 2000 11:43 AM