Gateway 6400 Manual De Usuario
36
Replacing and Adding System Components
6
Align the rails with an open bay in the bottom drive cage, and slide the
drive into the chassis until the locking tabs snap into place.
drive into the chassis until the locking tabs snap into place.
7
Connect the data and power cables to the drive. (See drive documentation
for proper cable orientation.)
for proper cable orientation.)
8
Close the case by following the instructions on page 20.
9
Reconnect peripherals, the modem cord, and the power cord, then turn
on the system.
on the system.
05032.book Page 36 Monday, July 10, 2000 11:43 AM