Gateway 7210 Manual De Usuario
80
Replacing and Adding Internal Devices
9
Using the handle at the bottom of the board support tray, pull the back
edge of the system board (the edge against the back panel) out of the
chassis.
edge of the system board (the edge against the back panel) out of the
chassis.
10
Remove the system board from the support tray by removing the seven
screws and snapping it off of the two snap-on standoffs, then place the
board in an anti-static bag or container.
screws and snapping it off of the two snap-on standoffs, then place the
board in an anti-static bag or container.
11
Install the replacement system board on the tray.
8505945.book Page 80 Thursday, March 9, 2000 2:13 PM