Fujitsu RX900 S1 Manual De Usuario
RX900 S1
Maintenance Manual
49
Basic procedures
4.7
Mounting the server in the rack
Inserting the server (if applicable)
Figure 10: Inserting the server
Ê
Pull the middle parts of the rails out of the rack completely until they click into
place (1).
place (1).
I
The middle parts of the rails must click into place so that they can no
longer be moved.
longer be moved.
Ê
Place the server in module direction as close as possible in front of the rack
and lift it to the mounting position.
and lift it to the mounting position.
V
CAUTION!
Due to the heavy weight, a suitable lifter is required to lift the server
to the mounting position. Make sure that the lifter is locked in place
before you start to mount the server.
to the mounting position. Make sure that the lifter is locked in place
before you start to mount the server.
Trained personnel
/
0
1
2
2
3
3
3
3