Fujitsu RX900 S1 Manual De Usuario
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
RX900 S1
Maintenance Manual
85
Hard disk and solid state drives
6.2.2
Starting the task
Ê
Perform the following procedures:
1.
2.
3.
Only applicable for removing non-defective HDD/SSD modules:
Ê
Set the drive to "Offline" via the software (RAID controller configuration
software), before removing an HDD/SSD module that is not defective.
software), before removing an HDD/SSD module that is not defective.
6.2.3
Unlocking the HDD/SSD module
Figure 37: Unlocking the 2.5-inch HDD/SSD module
Ê
Release the locking mechanism as follows:
1. Press the two green tabs of the locking lever together (1).
2. Push the handle of the HDD/SSD module fully in the direction of the
arrow (2). The HDD/SSD module is now unlocked.
2
1