Fujitsu V6.00 Manual De Usuario
ServerView Event Manager
113
Trap overview
5.3.10 MultiPath traps (mp.mib)
MIB-OID: 1.3.6.1.4.1.231.2.10.2
This section lists MultiPath traps in alphabetical order.
Trap name
ID
Meaning
Error class
sieMP
ActivePortChanged
ActivePortChanged
1202 The user has enabled or
disabled a path of a
MultiPath group.
MultiPath group.
informational
sieMPAutoRecovered
1205 A path of a MultiPath group,
which was in error status, is
accessible again due to
automatic recovery.
accessible again due to
automatic recovery.
informational
sieMPError
1200 A MultiPath group now
consists of only one path,
and an error has been
detected for this path. The
MultiPath group is not
operational anymore.
and an error has been
detected for this path. The
MultiPath group is not
operational anymore.
critical
sieMPErrorCleared
1206 A user has cleared the error
status for a path of a
MultiPath group.
MultiPath group.
informational
sieMPReconfigured
1203 A path has been removed
from or added to a
MultiPath group.
MultiPath group.
informational
sieMPRetry
1201 An error has been detected
on a path of a MultiPath
group. An attempt is being
made to execute the
command on another path
of the MultiPath group.
group. An attempt is being
made to execute the
command on another path
of the MultiPath group.
critical
sieMPStatusChanged
1204 A user has made a change
to a MultiPath group
(autorecovery was turned
on or off, loadbalancing was
turned on or off, or one path
was enabled or disabled.
(autorecovery was turned
on or off, loadbalancing was
turned on or off, or one path
was enabled or disabled.
informational
Table 27: MultiPath traps