Linksys WPS54G Guía Del Usuario

20

Click the TCP/IP tab to view or change the TCP/IP values of the PrintServer.

IP Address

Obtain an IP Address Automatically. If your network router is using DHCP to assign IP addresses, select Obtain 
an IP Address Automatically. By default, Obtain an IP Address Automatically is enabled.

Use the Following IP Address. If you need to assign the PrintServer a fixed IP address (also known as static IP 
address), select Use the Following IP Address, and enter the appropriate values under IP Address, Subnet 
Mask, and Gateway. Make sure the IP Address and Subnet Mask are appropriate for your network. If you change 
the PrintServer’s IP address, make sure you that you reconnect to the PrintServer using that new IP address. 
Otherwise, you will not be communicating with the PrintServer. In most cases, the Gateway IP address is the IP 
address of your router, and you should complete the Gateway field if you will use the PrintServer for Internet 
printing. (To find out your router’s IP address, consult your router’s documentation.) 

Connection

Delay before reconnection attempt. Set how long you want the PrintServer to wait between attempts.

Number of reconnection attempts. Specify the number of times that the PrintServer will attempt to connect to 
the network.

Click the Save button to apply your changes, or click Cancel to cancel your changes.