Linksys WPS54G Guía Del Usuario
50
Appendix A:
Common Problems and Solutions
Common Problems and Solutions
Wireless-G PrintServer
7. To start over, I need to set the PrintServer to its factory default settings.
Unplug the PrintServer’s power adapter. Press the Reset button while you plug in the PrintServer’s power
adapter. Continue to hold the Reset button for 10 seconds and then release it. This will reset the password,
wireless, and other settings on the PrintServer to the factory defaults. In other words, the PrintServer will
revert to its original factory configuration.
adapter. Continue to hold the Reset button for 10 seconds and then release it. This will reset the password,
wireless, and other settings on the PrintServer to the factory defaults. In other words, the PrintServer will
revert to its original factory configuration.
8. I need to upgrade the firmware.
In order to upgrade the firmware with the latest features, follow these steps:
1. Go to the Linksys website at http://www.linksys.com and download the latest firmware for the
1. Go to the Linksys website at http://www.linksys.com and download the latest firmware for the
PrintServer. Then extract the firmware file on your PC.
2. Open the PrintServer’s Web-based Utility. Click Status and then Device.
3. Click the Upgrade button, and follow the on-screen instructions.
3. Click the Upgrade button, and follow the on-screen instructions.