Fujitsu RX200 S2 Manual De Usuario
221
PRIMERGY RX200 S2 User’s Guide
8
Hardwa
re C
onfigu
rat
ion/Utilitie
s
8.2.9 Power On/Off Submenu
Appears when [Power On/Off] is selected from the [Advanced] menu. Configures power On/Off
settings.
table: Items on the Power On/Off Submenu
Item
Setting
Description
Remote
• Disabled
• Enabled (at the time of
• Enabled (at the time of
purchase)
Sets whether or not the power can be turned on
when the modem (connected to the serial port)
receives a ring signal.
when the modem (connected to the serial port)
receives a ring signal.
Resume On Times
• Off (at the time of
purchase)
• On
Sets whether or not to resume from suspend mode
at the specified time.
at the specified time.
Resume Time
-
Specifies the time to resume in the 24-hour
"hours:minutes:seconds" format.
"hours:minutes:seconds" format.
LAN
• Disabled
• Enabled (at the time of
• Enabled (at the time of
purchase)
Sets whether or not to enable the power to be turned
on via LAN.
on via LAN.
Power Failure Recovery
• Always ON
• Always OFF
• Previous State
• Always OFF
• Previous State
(at the time of purchase)
Sets the server power status after system down due
to power failure or after power recovery by the
UPS.
to power failure or after power recovery by the
UPS.
Note:
Set this item to [Always ON] when a UPS is
Set this item to [Always ON] when a UPS is
used.
Item Specific Help
PhoenixBIOS Setup Utility
Advanced
Power On Source
Remote: [Enabled]
Resume On Times: [Off]
Resume Time: [00:00:00]
LAN: [Enabled]
Remote: [Enabled]
Resume On Times: [Off]
Resume Time: [00:00:00]
LAN: [Enabled]
Power Failure Recovery:[Previous State]
Power On/Off
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values
-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit