NCR S26 Manual De Usuario
Sample Standard Configuration
C-12
Sample Configurations
IDE HDD Interface
[Disabled]
Parallel Port
[Enabled as LPT1 (3BCh)]
Serial Port
Select COM1 Port Address
[3F8h]
Select COM2 Port Address
[2F8h]
PCI 1 - PCI Ethernet CControl
[Auto Added]
PCI Function 1
[Enabled]
PCI 2 - PCI Token Ring
[Auto Added]
PCI Function 1
[Enabled]
Embedded - PCI SCSI
[Auto Added]
PCI Function 1
[Enabled]
Embedded - PCI VGA
[Auto Added]
PCI Function 1
[Enabled]
Standard VGA Resources
[Enabled]
*Note: If a PCI adapter is configured in the system, it will be displayed in
one of the PCI slots. Select [F6] to configure the interrupt.
one of the PCI slots. Select [F6] to configure the interrupt.
4. Exit and save the configuration.
The server is now set up, configured, and ready for the operating system.