NCR S26 Manual De Usuario

Using the AFlash BIOS Utility

5-4

Using the System Utilities

6. Select Load BIOS File to load the BIOS file into memory.

7. Select Program Flash Memory to erase the current BIOS, and program

Flash ROM.

WARNING:  Never turn off the system power while Flash BIOS is
programming. This will destroy the BIOS.

8. Reboot the system.

When you have already copied the AFlash files into your hard disk, you can
type AFLASH [filename] and press Enter at the DOS prompt (subdirectory
where the files are located) to quickly execute the program.

The program automatically performs the loading and programming functions,
then reboots the system.

If the program cannot find the BIOS file, it returns to the main menu and
flashes the following message:

Can't Read This File !!!
Press any key to continue...

In this case, follow the previous procedure in the section, “Executing AFlash,”
for loading and programming the BIOS file using the main menu.