Polycom RMX 1000 Manual De Usuario
Polycom RMX 1000 User Guide
3-11
Connecting to a Conference–Dialing Methods
To connect an endpoint to an ongoing conference or meeting room, you can
use one of the dialing methods below:
use one of the dialing methods below:
•
Dial the IP address of the RMX 1000 system through the remote control
to connect the RMX 1000. If the system is registered to a gatekeeper or
SIP server, dial the E.164 prefix or SIP URL to connect to the system, and
then use the remote control to select a conference in the PCM interface to
join. For details, see Entering an Existing Conference.
to connect the RMX 1000. If the system is registered to a gatekeeper or
SIP server, dial the E.164 prefix or SIP URL to connect to the system, and
then use the remote control to select a conference in the PCM interface to
join. For details, see Entering an Existing Conference.
•
Directly dial in to the conference using the remote control. For details,
see the following sections. In this way, the user must obtain the
conference ID and password (if the conference password or chairperson
password is set) first.
see the following sections. In this way, the user must obtain the
conference ID and password (if the conference password or chairperson
password is set) first.
H.323 Endpoint
For an H.323 endpoint, if the endpoint has been registered to the same
gatekeeper as RMX 1000, the dial-in number consists of the E.164 prefix of
RMX 1000 and conference ID. If the conference to be dialed in is set with a
password, you need to add "##Conference password or chairperson
password".
gatekeeper as RMX 1000, the dial-in number consists of the E.164 prefix of
RMX 1000 and conference ID. If the conference to be dialed in is set with a
password, you need to add "##Conference password or chairperson
password".
For example:
RMX 1000 E.164 alias: 925
ID of the conference to be dialed in: 1001
Then, the endpoint dials 9251001
If the conference to be dialed in is set with the conference password 1111 and
chairperson password 2222
chairperson password 2222
Then, the regular participant dials 9251001##1111
The conference chairperson dials 9251001##2222
If the gatekeeper is not configured on the network, the dial-in string consists
of the IP address of RMX 1000 and conference ID, separated with ##. If the
conference to be dialed in is set with a password, you need to add
##Conference password or chairperson password.
of the IP address of RMX 1000 and conference ID, separated with ##. If the
conference to be dialed in is set with a password, you need to add
##Conference password or chairperson password.
For example:
RMX 1000 IP address: 172.22.30.40
ID of the conference to be dialed in: 1001
Then, the endpoint dials 172.22.30.40##1001
If the conference to be dialed in is set with the conference password 1111 and
chairperson password 2222
chairperson password 2222
Then, the regular participant dials 172.22.30.40##1001##1111
The conference chairperson dials 172.22.30.40##1001##2222
SIP Endpoint
For the SIP endpoint, you can use the remote control to directly dial in to the
conference only when RMX 1000 and endpoint are registered to the same SIP
conference only when RMX 1000 and endpoint are registered to the same SIP