Polycom 3150-16966-002 Manual De Usuario

 

Enables/disables the network port. 

If the user network is configured with a Dynamic Host 

Configuration Protocol (DHCP) server, select this option 

to automatically obtain the IP address. 
Deselect this option to use a static IP address, in which 

case you need to configure the next three options. 

Set the IP address for this network port. 

Set the Subnet Mask for this network port. 

Set the gateway address of this port. If Set as Default is 

selected and no matched static routes is found, the device 

packets will be transmitted via this gateway by default. In 

this case, a default route is displayed in the list of Routers 

page. For details, see Routers. 

The Network Address Translation (

NAT) function of the 

system 

enables you to translate the private network IP 

address of packet into a public network IP address before 

transmission. To enable NAT, select this check box and 

then set the public network IP address to be displayed to 

the outside in the NAT IP field. 

Used in combination with the DHCP option. When the 

DHCP check box is selected, this option allows you to 

obtain the DNS server address automatically from a DHCP 

server in the network. 

If you did not select the option for automatic DNS address 

discovery, you must enter the preferred/alternate DNS 

server addresses here for the device to resolve domain 

names.