Polycom 3150-16966-002 Manual De Usuario

Set the H.323 alias for the system. 

 

If your IP network type is H.323 only, go to step 8. 

To configure the SIP server, click the SIP Server tab, and configure 
related parameters in accordance with the table below: 

 

Set the IP network type for the RMX 1000 system to make 

a call. You need to set it based on the call type used for the 

participant's endpoint. It can be set to: 

ƒ

 

Only H.323 calls are supported. 

ƒ

 

Only SIP calls are supported. 

ƒ

 

H.323 and SIP calls are supported at the 

same time. 

Settings of the SIP server related parameters are available 

only when the SIP network type is selected. 

Set the transport layer protocol used for communicating 

with the SIP server. It needs to be consistent with the 

protocol supported by the SIP server. 

Specifies whether to register RMX 1000 to the specified 

SIP server. You need to set the SIP server related 

parameters after this function is enabled.   

Displays the registration status of the SIP server. 
When registration of the preferred server fails, the 

alternate server will function as the current in-use SIP 

server.