Raritan Computer SX32 Manual De Usuario
C
HAPTER
2:
I
NSTALLATION
5
Initial Software Configuration
Figure 4 Hardware Setup for Initial Software Configuration
User Information:
This information should be entered for each user, up to 50 user accounts, with at least one administrator for
each Dominion SX unit:
This information should be entered for each user, up to 50 user accounts, with at least one administrator for
each Dominion SX unit:
•
User Name: 32 characters maximum, one character minimum, spaces permitted.
•
Login Name: 20 characters maximum, one character minimum, no spaces.
•
User Type:
−
Administrator: Can modify configuration of the unit, has read/write access to the console window.
−
Operator: Cannot modify configuration of the unit (except own password), has read/write access to
the console window.
−
Observer: Cannot modify configuration of the unit (except own password), has read-only access to
the console window.
•
Information: Any additional information (text) you want associated with this user. Can be 64
characters maximum, no minimum, spaces permitted.
•
Password: Alphanumeric text, 6–16 characters in length, no spaces. The first six characters of the
password must contain at least two alpha and one numeric character; the first four characters cannot be
the same as the user name.
the same as the user name.
Configuration
1. Disable Proxies in the installation computer Web browser.
Use “no Proxies” or temporarily add 192.168.0.192 to the list of URLs for which no proxy is
configured.
configured.
2. Enable Java™ Applet Execution in the installation computer Web browser.
3. Access the unit through your installation computer Web browser on the same subnet by typing the
3. Access the unit through your installation computer Web browser on the same subnet by typing the
URL https://192.168.0.192 into the address/location field.
4. Follow the configuration instructions on the screen.
Note: At this point you will enter all of the initial configuration information listed in Pre-Configuration
Notes.
Notes.
5. The unit will reboot automatically once it has been configured. The unit now has the user-defined
configuration settings, including a new IP address and is ready to be powered off, disconnected from
the installation computer, and moved to its intended location.
the installation computer, and moved to its intended location.
Dominion SX Unit
Installation
Computer
Browser
Crossover
Network
Cable
Network
Cable