Polycom 14117800 Manual De Usuario
Configuring KIRK Wireless Server 600v3 101
KIRK Wireless Server 600v3 Installation and Configuration Guide
1
Under the Configuration menu, click ETH0, and then click DHCP.
Figure 37
Adm. Page: Configuration/ETH0/DHCP page
2
From the Mode list, select Disabled, and then click OK.
3
Click Reset (under Administration menu) to save your configuration.
4
Under the Configuration menu, click ETH0, and then click IP.
Note:
It is necessary to use the ETH0 port when integrating the KWS600v3 on the
local network.
Figure 38
Adm. Page: Configuration/ETH0/IP page
5
In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KWS600v3.
The new IP address is now the default address when accessing the KWS600v3.
6
In the Network mask field, type a new network mask.
7
In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
Contact your system administrator for more information.
8
Click OK.