Polycom DOC2560C Manual De Usuario

Descargar
Página de 188
Polycom RMX 1500/2000/4000 Getting Started Guide
2-3
IP Network Services Required Information
When installing an RMX unit, these default IP addresses must be 
modified to your local network settings. Therefore it is important that 
before powering the RMX unit up for the first time, that you obtain the 
information needed to complete the Local Network Settings section of 
the table from your network administrator.
For RMX 1500, the network administrator should allocate three IP 
addresses in the local network for an MCU with a MPMx card.
For RMX 2000, the network administrator should allocate four IP 
addresses in the local network for an MCU with one MPM/MPM+/MPMx 
card and five IP addresses for an MCU with two MPM/MPM+/MPMx 
cards.
For RMX 4000, the network administrator should allocate four IP 
addresses in the local network for an MCU with one MPM+/MPMx card 
and up to seven IP addresses for an MCU with up to four MPM+/MPMx 
cards. 
Table 2-1
 
Network Equipment and Address Information
Parameter
Factory Default
Local Network Settings
Control Unit 
IP Address 
192.168.1.254
Control Unit
Subnet Mask
255.255.255.0
Default Router IP 
Address
192.168.1.1
Shelf Management IP 
Address
192.168.1.252
Signaling Host IP 
address
Media Board IP 
address (MPM 1)
Media Board IP 
address (MPM 2)
RMX 2000/4000 only