Cisco Systems SFS 7008 Manual De Usuario

52

1. Remove the new Chassis ID module from the package. 
2. Ground yourself appropriately. 
3. Remove the old Chassis ID module, if you have not already done so. Refer to 

 if a Chassis ID module is still in place. 

4. Align the chassis ID module with the slot and push the module completely into the bay. 

5. Use the LEDs to verify the status of the module. Refer to 

.

The new Chassis ID has been previously serialized with the information that is unique to your 
chassis. 

6. Reboot the chassis by using the GUI, or by using the reload command. 

Topspin-270# reload
System configuration has been modified. Save?
[yes (default)/no/*.cfg] yes
Proceed with reload? [confirm]
Topspin-270#
Connection to host lost.
#