Cisco Systems SFS 7008 Manual De Usuario
69
Fan LEDs
Location
The Fan LEDs are located at the top of each Fan tray module. Refer to
In addition, replicas of the Fan Tray LEDs are positioned on the back of the chassis. Refer to
Interpreting the Fan LEDs
Table 5-3: Interpreting the Power Supply Identify LED
Color
State
Indication
Yellow
blinking
Identify. Assists in identifying a particular Field
Replaceable Unit on the chassis. (see
Replaceable Unit on the chassis. (see
This state is initiated by the user.
This LED status is initiated manually by using the
diag LED test. Refer to the Command Line
Reference Guide for more information.
Example:
To run identity test on fan 1:
config mode -> power-supply 1 ->
test led ->
-> start - start flashing
-> stop - stop flashing
This LED status is initiated manually by using the
diag LED test. Refer to the Command Line
Reference Guide for more information.
Example:
To run identity test on fan 1:
config mode -> power-supply 1 ->
test led ->
-> start - start flashing
-> stop - stop flashing
Color
State
Indication
Green and
Yellow
Yellow
off
No power to the fan tray, or LED failure.
Green
solid on
Fan tray running with no detected errors.
Green
off
No power to the fan tray, LED failure, or yellow
LED is ON.
LED is ON.
Yellow
off
Fan tray running with no errors detected.
Yellow
solid on
Operator intervention required. Failure detected
within the fan tray.
within the fan tray.
Yellow
blinking
Identify. Assists in identifying a particular Field
Replaceable Unit on the chassis.
This state is initiated by the user.
This LED can be initiated manually by using the
diag LED test. Refer to the Command Line
Reference Guide for more information.
Example:
To run the identity test on fan 1:
config mode -> diag fan 1 ->
test led ->
-> start - start flashing
-> stop - stop flashing
Replaceable Unit on the chassis.
This state is initiated by the user.
This LED can be initiated manually by using the
diag LED test. Refer to the Command Line
Reference Guide for more information.
Example:
To run the identity test on fan 1:
config mode -> diag fan 1 ->
test led ->
-> start - start flashing
-> stop - stop flashing