Cisco Systems OL-9118-03 Manual De Usuario

When you start an MWTM client, the version and release of the client must match that of the MWTM 
server.

If there is a client-server mismatch, the MWTM displays a warning message when you try to start the 
client. If you have a web browser installed, the MWTM optionally opens a web page from which you 
can download an allowed, matching client. See 

 for more information about downloading the MWTM client.

If you see the following message upon client startup, you must set the DISPLAY variable: 

Could not launch client: Can't connect to X11 window server using <x> as the value of the 

DISPLAY variable.

The DISPLAY variable is set as part of your login environment on Solaris or Linux. However, if you use 
Telnet or SSH to access a workstation, you must set the DISPLAY variable to local display by using this 
command:

# setenv DISPLAY local_ws:0.0

where local_ws is your local workstation.

If your shell does not support the setenv command, enter:

local_ws:0.0

To start the MWTM client on a Solaris or Linux system on which the MWTM server is installed, ensure 
that the MWTM server is running, then enter:

# cd /opt/CSCOsgm/bin

# ./mwtm client

To start the MWTM client on a Solaris or Linux system other than the one on which the MWTM server 
is installed, ensure that the MWTM server is running, then enter:

# cd /opt/CSCOsgmClient/bin

# ./mwtm client

To start the MWTM client on a Solaris or Linux system other than the one on which the MWTM server 
is installed, and connect to an MWTM server other than the default server, enter:

# cd /opt/CSCOsgmClient/bin

# ./mwtm client

where server_name_or_ip_address is the name or IP address of the Solaris or Linux system on which 
the MWTM server is running.