Cisco Systems IP/TV 3400 Series Manual De Usuario

3-7

Cisco IP/TV 3400 Series Servers User Guide

OL-4467-01

Chapter 3 Installing the IP/TV Server

Installing Cisco IP/TV 3425 and 3425A Server Units

Connecting Cables

To connect network, monitor, keyboard, and mouse cables to the Cisco IP/TV
Server, follow these steps:

Step 1

Plug the monitor cable into the onboard video port on the IP/TV Server back
panel.

Step 2

Connect the other end of the monitor cable to a monitor.

Step 3

Connect a keyboard and mouse to the keyboard port and mouse ports on the IP/TV
Server back panel.

Step 4

For network connections, insert a Category 5 UTP cable into the
Ethernet port labeled “Ethernet 0” on the IP/TV Server front panel. (See

.) When active, the System LED on the left front corner of the Cisco

IP/TV 3400 Series Server is lit.

Note

The console port and Ethernet port 1 are not used by Cisco IP/TV 3400
Series Servers.

Figure 3-7

Cisco IP/TV 3425 and 3425A Servers—Front Panel Connectors

Step 5

Connect the other end of the network cable to a hub or switch in your network.

55004

CONSOLE

ETHERNET 0

ETHERNET 1

SCSI LVD ONLY

SLOT 0

SLOT 1

Console
(not supported in IP/TV)

Ethernet 0

Ethernet 1
(not supported in IP/TV)

SCSI LVD only

Slot 0

Slot 1