Cisco Systems IP/TV 3400 Series Manual De Usuario
3-29
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Chapter 3 Installing the IP/TV Server
Installing Cisco IP/TV 3427 Broadcast Server Units
Step 2
Connect the other end of the network cable to a hub or switch in your network.
Step 3
For monitor connections, plug the monitor cable into the onboard video port on
the IP/TV Server back panel. (See
the IP/TV Server back panel. (See
.)
Step 4
Connect the other end of the monitor cable to a monitor.
Step 5
Plug the keyboard and mouse cables to the keyboard port and mouse port,
respectively. (See
respectively. (See
.)
Connecting Power and Booting the System
To connect power to your system, follow these steps:
Step 1
Review the information in the
Step 2
Plug a power cord into each power cord receptacle on the back of the IP/TV
Server. (See
Server. (See
.)
1
Keyboard port
8
SCSI
1
connector
1.
SCSI = Small Computer System Interface
2
Onboard video port
9
USB
2
2 (not supported
2.
USB = Universal Serial Bus
3
Serial port
10 USB 1 (not supported)
4
Mouse port
11 ISMP
3
port (not supported)
3.
ISMP = Integrated System Management Processor
5
PCI
4
slots 1 and 2 (Winnov Videum 1010 Plus
video capture cards)
4.
PCI = Peripheral Component Interconnect
12 ISMP port (not supported)
6
PCI slots 3 (Winnov Videum 4400 AV video
capture card), 4, and 5 (Optibase MovieMaker
200S Networker video capture cards)
capture card), 4, and 5 (Optibase MovieMaker
200S Networker video capture cards)
13 Ethernet 2
7
AC power receptacles
14 Ethernet 1