Cisco Systems OL-13599-01 Manual De Usuario
4-11
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Chapter 4 Installing the Operating System
Creating the Partitions
•
Do not join a domain. Instead, specify a workgroup. The Cisco Unity installation guide alerts you
when to connect to the network and when to join a domain later in the installation process.
when to connect to the network and when to join a domain later in the installation process.
•
If you are prompted to specify Windows 2000 Server components to install, select the following
required components:
required components:
–
Internet Information Services
–
Message Queuing Services
Note
If you do not install all the required Windows 2000 Server components, subcomponents, and
service packs while installing the operating system, the Cisco Unity installation guide alerts you
when and how to install them later.
service packs while installing the operating system, the Cisco Unity installation guide alerts you
when and how to install them later.
Step 4
When the Windows 2000 Configure Your Server dialog box appears, click I Will Configure This Server
Later.
Later.
Step 5
Uncheck the Show This Screen at Startup check box, and close the window.
Creating the Partitions
Note
If the Cisco Unity server was purchased from Cisco, skip this section. When you installed Windows
using the Cisco Unity Platform Configuration discs shipped with the server, the partitions were created
automatically.
using the Cisco Unity Platform Configuration discs shipped with the server, the partitions were created
automatically.
Do the following procedure to create the partitions that you identified in the
.
To Create the Partitions
Step 1
Log on to Windows as a member of the Administrators group.
Step 2
On the Windows Start menu, click Programs > Administrative Tools > Computer Management.
Step 3
In the console tree under Storage, click Disk Management.
Step 4
Right-click the first available unallocated region of the first available logical disk, and click New
Partition (if Windows Server 2003 is installed) or Create Partition (if Windows 2000 Server is
installed).
Partition (if Windows Server 2003 is installed) or Create Partition (if Windows 2000 Server is
installed).
Typically, you will need to create one more partition than the number of logical disks available. After
you install the operating system, the first 12 GB of the first logical disk is used for the system partition,
and is given the drive letter C. You create the first extended partition by using the remaining space on
the first logical disk. When you create subsequent partitions, you use the entire logical disk.
you install the operating system, the first 12 GB of the first logical disk is used for the system partition,
and is given the drive letter C. You create the first extended partition by using the remaining space on
the first logical disk. When you create subsequent partitions, you use the entire logical disk.
Step 5
On the New Partition Wizard (Windows Server 2003) or Create Partition Wizard (Windows 2000 Server)
welcome screen, click Next.
welcome screen, click Next.
Step 6
Click Extended Partition, and click Next. (Do not click Primary Partition.)
Step 7
Specify to use the remaining disk space, and click Next.
Step 8
Verify the settings, and click Finish.