Cisco Systems OL-13599-01 Manual De Usuario
5-3
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Chapter 5 Customizing the Cisco Unity Platform
Configuring a Dual NIC in the Cisco Unity Server
Installing the NIC-Configuration Utility
Note
If you installed Windows by using the Cisco Unity Platform Configuration discs, skip this section.
Do the applicable procedure in this section, depending on whether the Cisco Unity server was
manufactured by Hewlett-Packard or IBM and, for IBM, depending on whether you have an Intel or a
Broadcom installation disc (the disc corresponds with the brand of NIC installed in the server):
manufactured by Hewlett-Packard or IBM and, for IBM, depending on whether you have an Intel or a
Broadcom installation disc (the disc corresponds with the brand of NIC installed in the server):
•
•
•
(Cisco-branded servers that have a model number ending in “H” were manufactured by Hewlett-Packard.
Cisco-branded servers that have a model number ending in “I” were manufactured by IBM.)
Cisco-branded servers that have a model number ending in “I” were manufactured by IBM.)
Note
The following procedures are intended for the software shipped with the Cisco Unity servers that were
shipping at the time this document was published. Procedures for older or newer servers may differ.
shipping at the time this document was published. Procedures for older or newer servers may differ.
To Install the Hewlett-Packard NIC-Configuration Utility
Step 1
Insert the Hewlett-Packard SmartStart disc in the DVD drive.
Step 2
Browse to the directory Compaq\Csp\Nt, and double-click Setup.exe.
Step 3
In the right pane of the HP Remote Deployment utility, select and delete all items except HP ProLiant
Network Configuration Utility <version> for Windows <2003/2000>.
Network Configuration Utility <version> for Windows <2003/2000>.
Step 4
Click Install.
Step 5
Follow the on-screen prompts to complete the installation.
To Install the IBM NIC-Configuration Utility by Using a Broadcom Disc
Step 1
Insert the Broadcom NetXtreme Gigabit Ethernet Software disc in the DVD drive.
If the installation program does not appear automatically, browse to the root of the CD, and double-click
Launch.exe.
Launch.exe.
Step 2
In the installation program, click Management Programs.
Step 3
Follow the on-screen prompts until you are prompted to select the applications to install.
Step 4
Check the Control Suite and BASP check boxes.
Step 5
Follow the on-screen prompts to complete the installation.