Fujitsu fi-5950 Manual De Usuario
231
10.1 Basic Product Specifications
10
SCANNER SPECIFICA
T
IONS
(* 1)
For details, refer to
.
(* 2)
The scanning speed is the maximum speed of the scanner hardware. The actual speed
may be slower due to the system overhead such as data transfer time.
may be slower due to the system overhead such as data transfer time.
(* 3)
With JPEG compression enabled
(* 4)
The maximum capacity varies depending on the document thickness. Refer to
(* 5)
The SCSI and USB interface cannot be used together.
(* 6)
When using USB 2.0, you have to use a port compatible to USB 2.0. When connecting to
USB 1.1, the scanning speed will decrease.
USB 1.1, the scanning speed will decrease.
(* 7)
Avoid connecting other SCSI devices to the same bus. It can reduce the scanner through-
put.
put.
(* 8)
You can imprint alphabetic characters and number on the scanned document.
The fi-590PRF (pre-imprinter) will print prior to scanning on the front side of the document.
The fi-590PRB (post-imprinter) will print after the scanning on the back side of the docu-
ment.
You can install both the fi-590PRF and fi-590PRB, but you cannot use them at the same
time.
The fi-590PRF (pre-imprinter) will print prior to scanning on the front side of the document.
The fi-590PRB (post-imprinter) will print after the scanning on the back side of the docu-
ment.
You can install both the fi-590PRF and fi-590PRB, but you cannot use them at the same
time.