Motorola MS4404 Manual De Usuario
11 - 44 Symbol MS4404/MS4407 Integration Guide
Set Lengths for Discrete 2 of 5
Parameter # L1 = 14h, L2 = 15h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for D 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
the code contains. Set lengths for D 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length - Select this option to decode only D 2 of 5 symbols containing a selected length.
Select the length using the numeric bar codes in
Select the length using the numeric bar codes in
. For example, to decode
only D 2 of 5 symbols with 14 characters, capture D 2 of 5 - One Discrete Length, then capture 1 followed
by 4. To correct an error or to change the selection, capture Cancel on
by 4. To correct an error or to change the selection, capture Cancel on
•
Two Discrete Lengths - Select this option to decode only D 2 of 5 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
selected lengths. Select lengths using the numeric bar codes in
. For
example, to decode only those D 2 of 5 symbols containing either 2 or 14 characters, select D 2 of 5 - Two
Discrete Lengths, then capture 0, 2, 1, and then 4. To correct an error or to change the selection,
capture Cancel on
Discrete Lengths, then capture 0, 2, 1, and then 4. To correct an error or to change the selection,
capture Cancel on
.
•
Length Within Range - Select this option to decode a D 2 of 5 symbol with a specific length range.
Select lengths using numeric bar codes in
Select lengths using numeric bar codes in
For example, to decode D 2
of 5 symbols containing between 4 and 12 characters, first capture D 2 of 5 - Length Within Range. Then
capture 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error
or change the selection, capture Cancel on
capture 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error
or change the selection, capture Cancel on
.
•
Any Length - Capture this option to decode D 2 of 5 symbols containing any number of characters within the
imager capability.
imager capability.
NOTE
Due to the construction of the D 2 of 5 symbology, it is possible for a scan line covering only a
portion of the code to be interpreted as a complete scan, yielding less data than is encoded in
the bar code. To prevent this, select specific lengths (D 2 of 5 - One Discrete Length - Two
Discrete Lengths) for D 2 of 5 applications.
portion of the code to be interpreted as a complete scan, yielding less data than is encoded in
the bar code. To prevent this, select specific lengths (D 2 of 5 - One Discrete Length - Two
Discrete Lengths) for D 2 of 5 applications.