Brocade Communications Systems DCX 8510-4 Manual De Usuario

Chassis door removal and replacement

5

Chassis door removal and replacement

NOTE

The chassis door must be installed to ensure the Brocade DCX 8510-4 meets EMI and other 
regulatory certifications. Additionally, if ICL cables are not used, EMI plugs must be inserted in the 
ICL cable ports to meet certification standards.

Time and items required

The replacement procedure for the chassis door takes less than five minutes. See 

.

Removing a chassis door

Support the door to prevent it from falling. Pull and remove the door. It will pop off the ball studs.

FIGURE 18

Removal and replacement of the chassis door

Replacing a chassis door

Complete the following steps to reinstall the door.

1. Align the holes in the door with the ball studs on the chassis

2. Push the door into place. It will snap onto the studs.