Opticon LMD 1135 Manual De Usuario

Manual No. 25-ULPNR102-01; Mar, 2005                                   LMD 1135 Laser Fixed Mount Scanner 

Page  1 

 

 

  

The LMD 1135 Fixed Position Scanner is a miniature, 100 scan per second, laser bar code reader 

designed to be easily incorporated into host equipment.  The small physical size makes the scanner easy 

to integrate into any hardware design.  Durability and reliability are assured.   

Advanced microprocessor technology coupled with Opticon’s proven decoding algorithms result in high 

speed operation with superior accuracy.  The scanner is fully programmable allowing the user to 

customize parameters including changing communication settings, selecting symbologies, adding prefixes 

and appending suffixes.   Programmable settings can be downloaded from the host CPU or computer 

directly to the scanner.    

The scanner is encased in a compact, rugged, yet lightweight-plastic enclosure.  The compact size 

permits installation in the tightest areas allowing great flexibility in mounting and positioning the scanner 

for optimum performance. 

This section is for those who wish to start using the scanner before reading the complete manual.  In 

only a few steps the scanner will be operable. 

Turn off the power to your PC and connect the scanner to an RS232 communications port.   Note:  You 

must provide +5 Volt DC power to the scanner.  If you are using our standard LPN1137RR1S-050 or have 

purchased the evaluation kit, you can utilize power supply, P/N 32-00907-01, by plugging its connector 

directly into the pigtail connector on the scanner.  If the power supply is obtained from another source 

verify that it is identified with the 

mark.  Turn on the power to the PC. 

1)  Using communications software (e.g., Procom), set the communication parameters: 9600 baud, 

1 Start/Stop Bit,  8 Data Bits, No Parity, No Handshaking,  No Flow Control 

2)  If you are operating in a Microsoft Windows 3.1 environment, skip to Step 5. 

3)  If you are operating in a Microsoft Windows 95/98/ 2000/ XP environment, you can set the 

communication parameters using Hyper Terminal as follows: 

♦ 

Open Hyper Terminal.  This can be done from Start

→Programs→Accessories/ 

Communications 

♦ 

Select Hypertrm.exe to create a New Connection 

♦ 

In the Connection Description dialog screen enter a name for the new file.  If desired, select 

an Icon.  Click OK 

♦ 

In the 

Connect To

 (

Phone Number)

 dialog screen, in the box entitled: 

Connect using

. select 

the communication port, for example, “Direct to Com 1” Click OK 

♦ 

In the 

Com 1 Properties

 screen, enter the appropriate Port Settings:  Bits per second = 9600,  

Data bits = 8,  Parity = None,  Stop Character = 1, Handshaking = None, Click OK 

♦ 

The hyper-terminal folder you just created will open.  From the File pull-down menu, select 

Properties

  then click on the 

Setting

 Tab