Radio Shack 20-404 Prospecto

©2009. RadioShack Corporation.  

All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.

02A09

Printed in China

GE-09D-0560

20-404/PRO-404

See the User’s Guide for complete instructions.

1.   Press  ,  ,  , 

, or  . The service search starts in two seconds.

2.   Press ENT when you find an interesting frequency (not applicable for 

marine or weather service banks). The bank number and StorE appear.

3.   If you want to change storage banks, enter the new bank number.
4.   Press ENT to store the frequency. The channel and frequency flash twice. 

To cancel the operation, press TUNE/CLEAR.

Refer to www.radioreference.com for a list of frequencies in your area.

1.   Press PGM. PGM appears. Enter the channel number (1–200) where you 

want to store a frequency, then press PGM again.

2.   Use the number keys and • to enter the frequency.
3.   Press ENT to store the frequency into the channel.
4.  Press SCAN to begin scanning stored/programmed frequencies.