Nikon COOLPIXP7100 Manual De Usuario
E55
Shooting Menu (
A, B, C or D Mode)
Re
fere
fere
nce
S
ect
io
io
n
B
Notes on the Wide-angle Converter for Shooting
• Set Wide-angle converter to On before shooting. Set Wide-angle converter to None when
no converter lens is attached.
• The built-in flash is set to W (off) when Wide-angle converter is set to On. Use flash units
E101) (available separately) to shoot with the flash.
• Using the flash units (available separately) may darken the peripheral area of the picture. Check the
picture on the monitor after shooting. A wide-flash adapter is recommended when shooting with
the Speedlight SB-600, SB-700, SB-800 or SB-900.
the Speedlight SB-600, SB-700, SB-800 or SB-900.
• AF-assist illuminator cannot be used when Wide-angle converter is set to On.
• This feature may not be used in combination with certain features. See “Features That Cannot Be
A80) for more information.
C
Installing and Removing the Lens Ring
• Before attaching the wide-angle converter,
remove the lens ring. Before installing or
removing the lens ring, be sure to turn off
the camera. While pressing the lens ring
release button, rotate the lens ring
clockwise and remove it.
removing the lens ring, be sure to turn off
the camera. While pressing the lens ring
release button, rotate the lens ring
clockwise and remove it.
• To attach the lens ring to the camera, align
the lens ring mounting index (white dot)
with the lens ring release button, and then
rotate the lens ring counterclockwise.
with the lens ring release button, and then
rotate the lens ring counterclockwise.
• When not using the wide-angle converter, be sure to attach the lens ring onto the camera.
• For more information on attaching the wide-angle converter, see the instruction manual provided
with the wide-angle converter.
Flash Control
You can set the built-in flash to off even when you are not using a Speedlight
(external flash unit) (
(external flash unit) (
B
Note on Flash Control
This feature may not be used in combination with certain features. See “Features That Cannot Be
Used Simultaneously” (
Used Simultaneously” (
A80) for more information.
Rotate the mode dial to
A, B, C or D M d button M A, B, C or D tab (A13) M
Flash control
Option
Description
a
Auto (default
setting)
setting)
When a flash unit is mounted, the flash unit fires. When a flash
unit is not used, the built-in flash fires.
unit is not used, the built-in flash fires.
k
Built-in off
The built-in flash is disabled.
Lens ring release button