Polycom RMX 2000 Manual De Usuario
Chapter 2-First Time Installation and Configuration
2-12
7
If you selected SIP, skip the following steps and go to Step 11.
8
Enter the required Gatekeeper information in the dialog box.
Table 2-4
Fast Configuration Wizard – Gatekeeper
Field
Description
Gatekeeper
Select Specify to enable configuration of the
gatekeeper IP address.
When Off is selected, all gatekeeper options are
disabled.
gatekeeper IP address.
When Off is selected, all gatekeeper options are
disabled.
Primary Gatekeeper
IP Address or
Name
Name
Enter either the gatekeeper’s host name (if a DNS
Server is used) or IP address.
Server is used) or IP address.
MCU Prefix in
Gatekeeper
Gatekeeper
Enter the string with which the MCU registers itself
with the gatekeeper.
The gatekeeper uses this string to identify the MCU
when forwarding calls to it.
H.323 endpoints use this number as the first part of
their dial-in string when dialing the MCU.
with the gatekeeper.
The gatekeeper uses this string to identify the MCU
when forwarding calls to it.
H.323 endpoints use this number as the first part of
their dial-in string when dialing the MCU.