Polycom VSX Series Manual De Usuario

Administrator’s Guide for the VSX Series

3 - 32

If your system is connected to your organization’s private network and also to 

a public network, you may need to specify the codes and prefixes necessary for 

dialing other systems.

Go to System > Admin Settings > Global Services > Dialing Rules.

Configure these settings:

Specifies the IP address or DNS address of the Global 
Directory Server. You can enter up to five addresses.

Lets you enter the global directory password, if there is one.

Registers this system with the Global Directory Server.

Displays other registered systems in the global directory.

Specifies whether to display the system’s name in the Global 
Directories of other registered systems.

Copies the global directory to this local system. When this 
setting is disabled, the system can display no more than 1,000 
global directory entries. When this setting is enabled, the 
system can display up to 4,000 global directory entries.

Specifies the group name used for global directory entries in 
the local directory. In the directory, entries from Global 
Directory Servers are listed in the Polycom GDS group.

Specifies that calls to sites in the same area code must 
include the area code.

Specifies that calls to systems in the United States must 
include a “1” before the area code.
Note: Even if you have this setting enabled, you may need 
to dial 1 and the area code when calling long distance over 
ISDN within your same area code.