Polycom VSX Series Manual De Usuario

 Customizing the VSX System

4 - 5

For more information about setting up the PowerCam Plus for automatic 

camera tracking, refer to the section 

Camera presets are stored camera positions that you can create ahead of time 

or during a call. 
Presets allow users to:

• Automatically point a camera at pre-defined locations in a room.

• Select a video source such as a VCR or DVD player, a document camera, 

or an auxiliary camera.

If your system’s main camera supports electronic pan, tilt, and zoom 

movement, you can create up to 100 preset camera positions for the near site. 

Each preset stores the camera number, its zoom level, and the direction it 

points (if appropriate). Near-site presets are available for VSX set-top and 

component systems. They remain in effect until you delete or change them.

If you are in a call, press 

 Near or 

 Far on the remote control to 

choose a near-site or far-site camera or other video source. 

If you selected a camera that supports electronic pan, tilt, and zoom, you 

can adjust the camera’s position:
— Press the arrow buttons on the remote control to move the camera up, 

down, to the left, or to the right.

— Press  

Zoom to zoom the camera out or in.

Press  

Preset on the remote control.

You must have a VSX 7000e or VSX 8000 with a Polycom PowerCam Plus 
camera.

If you are using Polycom microphones, make sure they are properly connected 
and unmuted, and that the Enable Polycom Microphones and Echo 
Canceller settings are selected.

If you are using a Polycom Vortex, disable the Enable Polycom Microphones 
and Echo Canceller settings.

Disable the Enable Polycom StereoSurround setting.