Polycom 7.5 Manual De Usuario

Select this option to place the conference on hold. 
While in the On Hold state, all the participants hear 
background music (if an external device is attached 
to the Audio+ IO card).
Clear this check box to reinstate the conference.
Note: A conference on hold can be released and 
placed on hold during an On Going Conference.
This option is enabled only for Audio Only 
conferences and only when an IVR Service is 
assigned to the conference and the Audio+ card is 
installed in the MCU.

Select this option to enable the Invite functionality in 
an IVR-enabled conference. When selected, 
participants in the conference can invite new 
participants during the conference. 
Note: This option can only be activated during the 
conference definition stage. It is valid only for 
conferences with an IVR service in which the Enable 
Invite messages and prompts are enabled. 
For more information, refer to the MGC Manager 
User’s Guide, VoicePlus Edition.

Select this option to automatically end the 
conference by the MCU and define the termination 
condition and the time period (in minutes) before the 
conference is considered idle:

•

Before First Join — No participant has 
connected to an On Going Conference for n 
minutes after it started. Default is 5 minutes.

•

After Last Quit — All the participants have 
disconnected from the conference and the 
conference is idle (empty) for a predefined time 
period. Default is 1 minute.

Since empty conferences still use resources that 
were reserved for them, this option is useful to save 
resources and billing costs.