Polycom 7.5 Manual De Usuario

2.

Define the dial-in numbers to be assigned to the conference as follows:

3.

Click OK. The dial-in numbers are added to the table in the Meet Me 
Service - ISDN Service pane.

4.

If participants use more than one ISDN Network Service to connect to 
the conference, repeat steps 1 to 3 to define dial-in numbers for these 
additional ISDN Network Services.

Enter the name of the ISDN Network Service or the 
T1-CAS Network Service to be used by participants to 
connect to the conference exactly as it is defined in the 
Network Services list (the system is case sensitive).

Enter the first dial-in number to be assigned to the 
conference. This number must be defined in the dial-in 
numbers range defined for the selected ISDN Network 
Service or the T1-CAS Network Service. For more 
details regarding the dial-in numbers range, see the 
MGC Administrator’s Guide, Chapter 3.
Note: When connecting ISDN lines via a private PBX 
to the MCU, the PBX may truncate the dialed numbers. 
In that case, the dial-in numbers defined in the ISDN 
Network Service may include only part of the dialed 
string. The operator must add the truncated digits to 
the dial-in number conveyed to the participant.

Enter the second dial-in number to be assigned to the 
conference. This number is optional.