Polycom Software 4.0.1 Manual De Usuario

Polycom® SoundStation® Duo Conference Phone User Guide

100

Press the Ok soft key

The Accept While Busy option allows PTT broadcasts to arrive as active calls 

(if enabled) or held calls (if disabled).
If enabled, a PTT broadcast will interrupt telephone calls and you’ll hear the 

audio of both the telephone call and the PTT broadcast. The party on the other 

end of the telephone call cannot hear the PTT broadcast unless that party has 

also enabled Accept While Busy.
If disabled, PTT broadcasts are held during an active call. To hear the 

broadcast, you have to resume the broadcast.

Press 

, and then select Settings > Basic > Preferences > 

Paging/PTT Configuration > PTT Push To Talk.

From the PTT Channel Configuration screen, scroll to 

Accept While Busy, and enable or disable the setting.
The default setting is Disabled. When enabled, your phone will accept 

and play broadcasts while you’re in an active call. When disabled, your 

phone won’t play broadcasts while you’re in a call, but will place them in 

a ‘pending’ state instead.

Press the Ok soft key.

Your phone may be enabled to operate in a broadcast mode called 

Group Paging mode. In this mode, you broadcast one-way announcements to 

a specified group of phones, called a Paging Group. In Group Paging mode, 

users must subscribe to Paging Groups to send and receive pages.

To send and receive pages, you need to subscribe to certain Paging Groups. By 

default, you’re subscribed to Paging Groups 1, 24, and 25. This means that:
• You can send pages to Paging Groups 1, 24, and 25.
• You’ll receive pages sent to Paging Groups 1, 24, and 25.

By default, when you send a group page, it’s automatically sent to 

Paging Group 1. This is your default paging group.