Polycom RMX 500 Manual De Usuario
Chapter 14 –
System Maintenance
14-10
SNMP Properties – Traps
Parameter Configuration of SNMP Traps
Parameter
Description
SNMP Trap
Version
Version
Specifies the SNMP Trap version used by MCU
•
Version 1 and Version 2 - When this option is selected, you
need to configure "Trap Destinations" and "Community
Name".
need to configure "Trap Destinations" and "Community
Name".
•
Version 3 - Specifies the parameter settings of secure and
remote configuration; when this option is selected, you need
to configure "User Name", "Security Level" and related
options.
remote configuration; when this option is selected, you need
to configure "User Name", "Security Level" and related
options.
Trap Destinations
Specifies sending destinations of SNMP Traps
Community Name
Specifies the name of community to which the MCU and SNMP
management workstation belongs. Community Name is used
by the agent to authenticate the SNMP management
workstation.
management workstation belongs. Community Name is used
by the agent to authenticate the SNMP management
workstation.
User Name
Set the name of user remotely accessed by SNMP.
Engine ID
Specifies the engine ID of SNMP
Security Level
Specifies whether to enable the authentication mechanism and
encryption mechanism
encryption mechanism
Authentication
Protocol
Protocol
Specifies the authentication algorithm. MD5 and SHA are
available.
available.
Authentication
Password
Password
You can set a password for the authentication protocol to
enhance security.
enhance security.
Encryption
Protocol
Protocol
Specifies the encryption algorithm. DES and AES are available.
Trap Setting
Specifies whether the agent sends Traps packets to the
management workstation in the following cases:
management workstation in the following cases:
•
System alerts
•
Connection