Polycom RMX 500 Manual De Usuario
Chapter 2 –
First Time Installation and Configuration
2-8
Configuration of SIP Server Parameters
Parameter
Description
IP Network Type
Set the IP network type for the RMX system to make a
call. You need to set it based on the call type used for the
participant's endpoint. It can be set to:
call. You need to set it based on the call type used for the
participant's endpoint. It can be set to:
•
H.323: Only the H.323 call is supported.
•
SIP: Only the SIP call is supported.
•
H.323 & SIP: The H.323 call and SIP call are
supported at the same time.
supported at the same time.
Settings of the SIP server-related parameters are
available only when the STP-supporting network type is
selected.
available only when the STP-supporting network type is
selected.
Transmission Type
Set the transport layer protocol used for communicating
with the SIP server. It needs to be consistent with the
protocol supported by the SIP server.
with the SIP server. It needs to be consistent with the
protocol supported by the SIP server.
Registration with the
server
server
Specifies whether to register RMX to the specified SIP
server. You need to set the SIP server-related parameters
after this function is enabled.
server. You need to set the SIP server-related parameters
after this function is enabled.
Preferred/Alternate
Server
Server
Displays the registration status of the SIP server.
When registration of the preferred server fails, the
alternate server will function as the current in-use SIP
server.
alternate server will function as the current in-use SIP
server.
Server IP Address
Provides the IP address of the SIP server for registration
service.
service.
Server Port
Provides the connection port of SIP server for registration
service.
service.
Server Domain Name
Provides the domain name of the SIP server for
registration service.
registration service.
User Name
Displays the User name provided by the SIP server for the
registered user.
registered user.
Password
Displays the Password matched to the user name.
Outbound Proxy Server
For communication with the SIP server when the RMX
system is configured on the internal network, an outbound
proxy server is required to implement traversal of the
firewall/NAT. In this case, you need to set the IP address
and port number for the outbound proxy server.
system is configured on the internal network, an outbound
proxy server is required to implement traversal of the
firewall/NAT. In this case, you need to set the IP address
and port number for the outbound proxy server.
8
Click the "OK" button to complete the configuration.
For more network service configuration information, see IP Network Services.
Synchronizing System Time
Before holding a conference using the RMX system, you need to first
synchronize the system time to ensure that the conference scheduling time is
consistent with your local time.
1
In the Web configuration interface, click "Settings -> RMX Time" to go to
the system time configuration interface.