Polycom DOC2066F Manual De Usuario

11. Define the following parameters to record the audio channel of the 

conference:

For more information about recording the audio channel of a conference, 
see chapter 8, "Recording".

12. To complete the conference definition procedure, click OK from any of 

the Conference Properties tabs.

The Properties dialog box closes. If all the properties are configured 
correctly, and if there are sufficient MCU resources to run the 
conference, the new conference is added to the On Going Conferences 
list in the Browser pane of the main window, and starts immediately. You 
can click the conference icon to view the status data in the Status and 
Monitor pane of the MGC Manager main window.

Select this option to enable recording.

If you enabled recording, select the required 
Recording Link from the list of the defined links. If 
left blank, the default recording link will be used. 
The recording link defines the connection 
parameters between the conference and the 
recording system.
Note: To view the Recording Links defined for the 
MCU, double-click Recording Links under the MCU 
Configuration icon.

Select when to start recording the conference:

•

Immediately - when the conference starts, even 
if no participant is connected

•

Upon Request - the recording starts when the 
chairperson sends the appropriate request by 
DTMF codes or by the MGC Manager operator.