Panasonic CF-F8 Manual De Usuario
23
Get
ting St
arted
U
seful In
formati
on
Troubleshooting
Appendix
Intel
®
Active Management Technology (Intel
®
AMT)
<Only for model with AMT>
Intel
Intel
®
AMT offers the operational management function and security function through network.
1
Turn on the computer, and press
F2
or
Del
while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
z
z
If the password is requested, enter the Supervisor Password.
2
If the Supervisor Password is not set, select the [Security] menu, then set Supervisor
Password.
Password.
3
Select the [Security] menu, and select [AMT Configuration], and press
Enter
.
4
Select [Intel(R) AMT] and press
Enter
.
5
Select [Enabled] and press
Enter
.
6
Select [Intel(R) ME Setup Prompt] and press
Enter
.
7
Select [Enabled] and press
Enter
.
8
Press
Esc
.
If you do not use the Supervisor Password, clear the Supervisor Password following steps.
A
A
Select [Set Supervisor Password], and press Enter.
B
Enter the Current Password, and press Enter.
C
Press Enter when the [Create New Password] display is shown.
D
Press Enter when the [Confirm New Password] display is shown.
9
Press
F10
.
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
The computer will restart.
The following procedures are example. It is different according to your environment. Contact your technical sup-
port office.
A
port office.
A
Press Ctrl + P when [Press <CTRL - P> to enter Intel(R) ME Setup] is shown after the [Panasonic] boot
screen disappears.
screen disappears.
B
Enter “admin” in [Intel(R) ME Password], and press Enter.
C
Enter the New Password in [Intel(R) ME New Password] to change the password, and press Enter.
At confirmation massage, enter the password, and press Enter.
Write down new password to remember you password.
The password has the limitation
At confirmation massage, enter the password, and press Enter.
Write down new password to remember you password.
The password has the limitation
(Î
bellow).
D
Select [Intel(R) ME Configuration], and press Enter.
At the confirmation message, press Y.
At the confirmation message, press Y.
E
Setup the items if necessary.
Confirm your system administrator about the setup items.
Confirm your system administrator about the setup items.
F
Select [Return to Previous Menu] after setup is complete.
Follow the on-screen instructions.
The computer will restart.
Follow the on-screen instructions.
The computer will restart.
CAUTION
z
You can use the following characters to set Intel(R) ME Password.
• Minimum of 8 and maximum of 32 characters are used.
• 1 or more numeric characters are included.
• 1 or more special characters (example: “!” “$”) are included (only characters that can be displayed with the US
• Minimum of 8 and maximum of 32 characters are used.
• 1 or more numeric characters are included.
• 1 or more special characters (example: “!” “$”) are included (only characters that can be displayed with the US
keyboard).
• Capital letters and small letters are mixed.
Setting AMT configuration