Schneider Electric TSXCUSBMBP Manual De Usuario
TSXCUSBMBP Settings for Unity
35011984 02/2006
59
3
Install and make sure the Modbus Driver is running for Unity's Modbus
Communication. (This is used by Unity, OFS, etc.)
Communication. (This is used by Unity, OFS, etc.)
4
Configure the Modbus Driver to use the USB MBP Virtual port (COM3).
5
Setup Unity's PLC Address setting for Modbus01 (Modbus Driver), and the local
Modbus Plus address or the address as defined in the USB MBP routing table.
Modbus Plus address or the address as defined in the USB MBP routing table.
6
Make sure both drivers are running:
Step Action