Panasonic WJ-GXE500E Guía De Operación

50

Refer to page 29 for general information about this tab.

User auth. *1

On/Off

User name

(Default: None (blank))

Password *2 

(Default: None (blank))

Retype password

(Default: None (blank))

Access level *3 

1. Administrator/2. Camera control/3. Live only

User check *4

(Example: admin [1])

*1

• When user authentication (authentication error) has failed to pass 8 times within 30 seconds using the

same IP address (PC), access to the unit will be denied for a while.

*2

• When the user name already in use is entered and the [Register] button is clicked, the respective user

information will be overwritten.

*3

• 1. Administrator: Allowed all available operations of the unit.

2. Camera control: Allowed to display images from the camera and to control the camera. The unit setting

configuration is unavailable.

3. Live only: Only displaying live images is available. The unit setting configuration and camera control are

unavailable.

*4

• The registered users will be displayed in the drop-down list as follows: "User name [access level]"

Refer to page 29 for general information about this tab.

Host auth.

On/Off

IP address *1 *2 

(Default: None (blank))

Access level

1. Administrator/2. Camera control/3. Live only

Host check *3

*1

• When "IP address/subnet mask" is entered, it is possible to restrict PCs in each subnet. 

For example, when "192.168.0.1/24" is entered and "2. Camera control" is selected for the access level, 
the PCs whose IP address is between "192.168.0.0" - "192.168.0.255" can access the unit with the 
access level "2. Camera control".

*2

• When the IP address already in use is entered and the [Set] button is clicked, the respective host informa-

tion will be overwritten.

*3

• The registered hosts will be displayed in the drop-down list as follows: "Host name [access level]" 

(Example: 192.168.0.21 [1])